Beam racks are specialized warehouse racks for the purpose of accessing palltized goods. Beam racks consist of columns and beams.Beamracks are simple, safe and reliable. Beam-type racks are the most commonly used form of shelves and must be used in conjunction with forkittrucks. Forkift trucks can freely access any position of goods; they have the advantages of simple structure, convenient operation, goodaccessibility,safety and reliability, and the ability to fully utilize the space area. Improve warehouse utization.

The cross-section of the column is composed of 11-13 planes.It has the advantages of largenertial distance,strong bearing capacity,and strong impact resistance.Due to the adoption of the”first automatic post-perforation post-cold forming”technique,it is possible to completely avoidstress concentration due to the post.Lead to column crack failure.

All beams adopt a bite-synthesizing type of automatic bite-synthesizing machine.Compared withthe traditional manual first-snapping and then welding welding,it has an absolute advantage.It notonly looks beautiful,no welding point,and the structure is more sturdy and durable,carryingcapacity is more than traditional The beam has greatly improved.

Precautions:

1.Beam racks should be used with pallets and forkits. Forklifts must be prohibited from hitting. Forkits must be handled lighty and steaily.
2.Beam-type shelves should be used to prevent top-heavy:high-level light goods should be placed, the principle of heavy cargo at the bottom.
3.The use of cross-beam racks should be protected against overload:The weight of each store floor should not exceed the maximum load of theshelf design.
4.The use of beam racks should be ultra-high and wide. The dimensions of the trays and cargo should be sightly less than 200 mm in the clearspace,and the height of the goods should not exceed 1800 mm.The goods must be neat, and try not to exceed the size of the tray.
5.It is forbidden for personnel to climb shelves.When there is cargo above the shelf,the operator should try not to enter the bottom of the shelf.
6.When stacking cargo, the forkit should place the tray as close to the column as possible, leaving the gapin the middle of the two trays, which willincrease the safety factor of the beam and the shelf ife.
7.When the cross-beam rack is used, warehouse personnel and forkit rivers should regularly checkthe use of the shelves and find that abnomalconditions and safety hazards must be reported to the higher authorities ina timely manner.